- ALL COMPUTER, ELECTRONICS AND MECHANICAL COURSES AVAILABLE…. PROJECT GUIDANCE SINCE 2004. FOR FURTHER DETAILS CALL 9443117328
project spares > Electronics /Electrical
METAL TOUCH SENSOR
The sensor has 3 main components on its circuit board. First, the sensor unit at the front of the module which measures the area physically and sends an analog signal to the second unit, the amplifier. The amplifier amplifies the signal, according to the resistant value of the potentiometer, and sends the signal to the analog output of the module. The third component is a comparator which switches the digital out and the LED if the signal falls under a specific value. You can control the sensitivity by adjusting the potentiometer.
Product Code : ESR015
Availbility : 10
Price Rs. 200/-
DATA SHEET
The sensor has 3 main components on its circuit board. First, the sensor unit at the front of the module which measures the area physically and sends an analog signal to the second unit, the amplifier. The amplifier amplifies the signal, according to the resistant value of the potentiometer, and sends the signal to the analog output of the module. The third component is a comparator which switches the digital out and the LED if the signal falls under a specific value. You can control the sensitivity by adjusting the potentiometer. Working voltage: for DC 5V Dimensions: 43 x 16 x 15 mm / 1.69 x 0.63 x 0.59 inch Single channel signal output Low level output signal used for human body touch sensor alarm Adjustable sensitivity
METAL TOUCH SENSOR
DESCRIPTION
