FABRICATION OF SOLAR BASED WATER PUMP

Abstract

This project is used to draw water using Solar power. The main parts in this project are Solar panel, Battery, Motor with gear, reciprocating rod, Cylinder and piston arrangement, One way Valves and delivery tubes. The solar panel is connected with the battery. The solar panel converts solar power into electric power. The electric power is stored in the battery. The motor with gear setup is connected with the fly wheel. When the motor is switched on, the fly wheel will be rotating with constant speed and thus it operates the reciprocating rod move to and fro accordingly. A piston is connected with the reciprocating rod so that the piston moves to and fro inside the cylinder simultaneously. A one way valve is connected with the cylinder so that the water can come in and not go out. At the other end of the cylinder, the delivery hose is connected. Thus when the motor is switched on, the water is drawn through the suction pipe and delivers through the delivery pipe.

Existing System

Proposed System

Architecture

BLOCK DIAGRAM

LINE DIAGRAM