FABRICATION OF MULTI-PURPOSE MACHINE

Abstract

The aim of our project is to design and fabricate a pneumatically operated multipurpose device. With this device a number of operations can be performed. They are as follows: 1. Drilling 2. Reaming 3. Boring 4. Grinding 5. Screw driving This device is operated by compressed air. It consists of the following main parts. 1. Barrel 2. Shaft 3. Frame and supporting column 4. PU tube 5. Couplings, etc. A high pressure compressed air is forced on a fan and the fan is made to rotate. This rotation is transmitted to the machining head by a shaft and the required operation is carried out. Further if a hole is to be drilled in a part in an automobile, the particular part is to be dismantled from the vehicle. By using this pneumatically operated device holes can be drilled in the required part with one dismantling it from the vehicle. So this pneumatically operated multi purpose device is used for various operations with a less amount of investment.

Existing System

Proposed System

Architecture

Image 1